夹具订制
AGG可在机械手和模具间提供精i准的中心。
注塑模具内金属嵌件安放时尤其要注意这一点。
夹具AGG...B 安装在EOAT上，钢管 AGG...C 安装在模具上。
一旦机械手向模具靠近，夹具在压力的作用下逐步向钢管靠近，
并与之接触。
AGG21-B 和 AGG30-B 采用的是双动作安全弹簧，确保在压缩空
气 (NC)缺失时设备的正常运行。
AGG19-B 采用的是单动作复位弹簧(NO)。
Gripper for engagement
The AGG is used to provide a precise centering between the robot
and the mould.
This necessary when metal inserts must be p1aced in the
mould, before the p1astic injection.
The gripper AGG…-B is fitted on the EOAT, while the steel bushing
AGG…-C is fitted on the mould.
Once the robot has approached the mould, the gripper is
pressurized, thus it closes and engages the bushing.
AGG21-B and AGG30-B are double-acting with a safety spring to
keep the gripper engaged even without compressed air (NC).
AGG19-B is single-acting with reset spring (NO).
MGX系列自动对准双钳口平行i气动钳夹
• 平直侧面。
• 坚固导道。
• 高夹紧力。
• 重量轻、尺寸小。
• 高精度尺寸。
• 可带关闭弹簧(-NC)或开启弹簧(-NO)。
• FDA-H1 食品级润滑脂。
2 parallel self-centering pneumatic gripper
series MGX
• Flat profile.
• Robust guide.
• High gripping force.
• Small weight and dimensi0ns.
• High dimensional accuracy.
• Spring closed (-NC) or spring open (-NO) option.
• FDA-H1 food-grade grease.
双钳口自动校准平行i气动夹具(SGP-S系列)
•双动作。
•反冲调整系统。
•小尺寸高i性能。
•紧固的构造使其非常适合重型作业的运用，使用寿命长，免维护。
•不同的紧固和输送选项。
•随时用于 PRO-SN…HS (1) 可编程磁性传感器。
•食物级润滑油FDA-H1。
Double acting.• Backlash adjusting system.• High performance in small dimensions.• The rugged construction lends itself to heavy duty applicationsfor a trouble free long life without maintenance.
Various fastening and air feeding options.• Ready for PRO-SN …HS (1) programmable magnetic sensor.• Food grade grease FDA-H1.
传感器
可以通过一个 3 输出可编程传感器（需另行购买）检查运行位置，该传感器用于检测嵌入右侧颚形钳的磁体位置。
The operating position can be checked by one 3 - outputs programmable sensor (not included), detecting the position of the magnet on the right jaw.
以上信息由专业从事气动旋转装置的吉玛泰克于2024/5/15 12:56:57发布
转载请注明来源：http://yancheng.mf1288.com/jmtkzdh-2753192924.html
下一条：盐城钢带排水管值得信赖「桓通」
